Cytron UC00A Bedienungsanleitung PDF herunterladen (Seite 37)

ROBOT . HEAD to TOE

Product User’s Manual – SK40C

4. Load the hex file of SK40C HID Bootloader Firmware as mentioned in Section 5.4.2.

5. After USB bootloader firm was loaded into PIC, unplug the UIC00A/B programmer.

For boot mode, press and hold the SW2 then connect the mini USB port on SK40C

board to your PC then release the SW2. Another way to activate the boot mode is

pressing and holds the SW2 then press RESET button without unplug the USB cable.

6. SK40C has secondary power supplied by USB port, so external power may not

needed for USB application. LED1 and LED2 will alternate blink at the time when in

boot mode. These messages will pop out one by one on your PC for first time plug in

only.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Keine Kommentare

Cytron UC00A Bedienungsanleitung Seite 37